Two Hand Control Monitoring Relay 'MSR7R'
(440R-D23021)
£112,318.88
The MSR7R 'Minotaur' is a two hand control device that monitors the
input from two pushbuttons, sited so that each button must be operated
by each hand. For operation to start, the buttons must be pressed
simultaneously (within 0.5 seconds) and held in until the machine has
run down. The units will detect any single safety critical fault occurring internally or on the output circuits, and will initiate lock-out to a safe state. Suitable for use with the 'Protekta' two hand control unit.
input from two pushbuttons, sited so that each button must be operated
by each hand. For operation to start, the buttons must be pressed
simultaneously (within 0.5 seconds) and held in until the machine has
run down. The units will detect any single safety critical fault occurring internally or on the output circuits, and will initiate lock-out to a safe state. Suitable for use with the 'Protekta' two hand control unit.
MINOTAUR 7R 24V 3N/O+1N/C MINOTAUR 7R 24V 3N/O+1N/C
| Manufacturers Part Number | 440R-D23021 |
|---|---|
| Coil or Supply Voltage | 24Vac or Vdc |
| Function | 2 Hand |
| Contact Configuration | 3N/O + 1N/C |
| Connection | Screw Terminals |
| Reset Type | Auto |
| Width | 45mm |
| Channels | Dual Channel |
| Catalogue Page | Catalogue pdf, prices not current. |
| Technical Data1 | Guardmaster MSR7R Manual |
| Pack Unit | EACH |
| Manufacturer | GUARDMASTER |
| Price | 112318.88 |
